Pe protective film and pet protective film technical parameters

Used for advanced heat shield heat setting. Roll size is fixed according to user requirements 500m-2000m
Pe protective film and pet protective film technical parameters

1, PE transparent protective film

1Functional experiment: It is easy to stick and peel on the surface of the object, and it does not move the glue, and the steel plate is bent 90° without cracking or falling.

2 load-bearing experiment: 360 hours 20 ° C -50 ° C banned by 2Kg 2.5cm2 load peeling without glue residue appearance.

3 anti-aging test: 300W ultraviolet lamp shines on the premise of 50 °C for 240 hours, no cracking, no deformation, tearing off the appearance of no residual glue scene.

4 resistance to humidity test 1 small light photo +1 hour rain after 240 hours is not scattered, peeling off the appearance of no residual glue.

2, PET transparent printing high temperature protective film

Used for advanced heat shield heat setting. The roll size is fixed to the user's requirement of 500m-2000m.

3, PE blue protective film

1 Peel strength ≥ 12N25mm.

2 holding strength ≥ 60 points 25x25mm. 1Kg has no shift.

3 initial viscosity (Φ11 steel ball) ≤ 10cm.

4 moderate temperature -100 ° C ~ +100 ° C.

Pe black and white protective film printing protective film textured protective film milky white protective film



Kunshan Andongyu Electronics Co., Ltd., Jiangsu Province, is a professional manufacturer of industrial tape, high temperature tape, masking tape, acrylic tape, foam tape, kraft paper tape, non-substrate double-sided tape, sealing tape and other adhesive products. factory.


Http://news.chinawj.com.cn Submission: